Cup Lock systems Components
| Code | Item Description |
| 1 |
Base Jack |
| 2 | Ledger |
| 3 | Standard |
| 4 |
Universal Jack |
| 5 |
Decking Beam |
| 6 |
Infill Beam |
| 7 |
Drop Head & Socket Adapter |
| 8 |
18 mm Plywood |
Standard
THE STANDARDS are economical and can match any propping access application where they allow support or access needed. Made from the highest quality steel the upper cups can be moved, while the lower cups are welded into position. Spigot joints can be attached to the holes drilled in the standard and if needed. The standards are available in 0.50 m to 3.0 m sizes.
| Code | Size | KG |
| S 01 | 3.00cm | 15.38 |
| S 02 | 2.80cm | 14.64 |
| S 03 | 2.50cm | 12.82 |
| S 04 | 2.30cm | 12.11 |
| S 05 | 2.00cm | 10.26 |
| S 06 | 1.80cm | 9.55 |
| S 07 | 1.50cm | 7.70 |
| S 08 | 1.30cm | 6.86 |
| S 09 | 1.00cm | 5.13 |
| S 10 | 0.80cm | 3.85 |
| S 11 | 0.70cm | 3.29 |
| S 12 | 0.50cm | 2.57 |
Ledgers
Only the highest quality steel tubes are used for Cup Lock system ledgers. To avoid any potential damage. They have identical forged ends with minimum of projection Ledgers are available in sizes ranging from 0.60 m up to 2.5 m
| Code | Size | KG |
| L 01 | 2.50cm | 9.82 |
| L 02 | 1.80cm | 6.00 |
| L 03 | 1.60cm | 3.36 |
| L 04 | 1.30cm | 5.05 |
| L 05 | 1.20cm | 4.41 |
| L 06 | 1.00cm | 3.46 |
| L 07 | 0.90cm | 3.14 |
| L 08 | 0.80cm | 2.82 |
| L 09 | 0.60cm | 2.18 |
| L 10 | 0.30cm | 1.33 |
Cantilever Elements
provide extra support at the edge of construct-ion especially slab edge from work, the cantilever frame (CF)& cantilever beam frame (CBF) can be attached directly to the vertical at the node points. In these frames universal jacks can be fitted to hold the various supports, Fork heads and Drop heads a 1.2m or 1.25m span.
Cantilever Frame
provide extra support at the edge of construct-ion especially slab edge from work, the cantilever frame (CF)& cantilever beam frame (CBF) can be attached directly to the vertical at the node points. In these frames universal jacks can be fitted to hold the various supports, Fork heads and Drop heads a 1.2m or 1.25m span.
| Code | Sizes | KG |
| CF 01 | 1.50cm | 16.60 |
| CF 02 | 1.00cm | 15.40 |
Cantilever Beam Frame
| Code | Sizes | KG |
| CF 01 | 1.50cm | 19.20 |
| CF 02 | 1.00cm | 14.55 |
Beam Bracket
Beam bracket eliminates full height propping to beam formwork by location on to slab support vertical as shown. The beam bracket distributes the load throughout the surrounding Cup Lock systems structure.
Hop-Up Bracket
Hop-Up Bracket are smaller versions of cantilever frames, but they are used soley for assisting access to awkward areas. Minor loading should be transferred with hop-up bracket.
Decking System
Decking Beam
The decking beams are designed with wide top flange thereby reducing maintenance costs by increasing the lifespan of the plywood. The decking beams are available in all the standard sizes.
| Code | Sizes | KG |
| DB 01 | 2.50cm | 25.7 |
| DB 02 | 1.80cm | 19.32 |
| DB 03 | 1.20cm | 13.35 |
Infill Beam
Infill beam are used to provide the transom support underneath the plywood. All standard sizes are manufactured, as well as any special sizes upon request. They have a wide top which gives more support For the plywood.
| Code | Sizes | KG |
| IB 01 | 1.70cm | 9.82 |
| IB 02 | 1.50cm | 6.00 |
| IB 02 | 1.20cm | 5.36 |
| IB 02 | 1.10cm | 5.05 |
| IB 02 | 0.90cm | 4.41 |
| IB 02 | 0.80cm | 3.46 |
| IB 02 | 0.50cm | 3.14 |
Drop Head
The most important part of shuttering is the drop head. Made with an extra-strong steel wedge, the dropheads allow the beams, infills and panels to be lowered at hammers stroke. The wedge is specially constructed to endure repeated strokes of the hammer.
Universal Jack
Universal jacks allow differences in height to be maintained. The base jacks like the universal jacks are either hollow or solid with deep threads. Easy adjustments can be made with the universal jacks special spindles.
Base Jack
The base jacks are made of the highest quality steel, and are designed with deep threads and strong handles. both solid and hollow jacks to meet individual specifications.
| Code | Sizes | KG | Cross sections |
| CF 01 | 0.75cm | 3.20 | Hollow |
| CF 02 | 0.65cm | 2.96 | Hollow |
| Code | Sizes | KG | Cross sections |
| CF 01 | 0.65cm | 3.35 | Hollow |
| CF 02 | 0.65cm | 5.33 | Solid |
Adjustable U-jacks
The Adjustable U-jacks are made of the highest quality steel, and are designed with deep treads and strong handles. both solid and hollow jacks to meet individual specifications.
| Code | Sizes | KG | Cross sections |
| CF 01 | 0.65cm | 4.39 | Hollow |
| CF 02 | 0.65cm | 8.35 | Solid |
Base Plate
The base plate is used at the bottom of a standard to give the necessary spread of load ensuring complete stability.
Rocking Base Plate
The component is used either as a base plate at the bottom of a standard to give the necessary spread of load, or when the jack is used at the top of the standard as a rocking plate, to accommodate a drophead in a slanting position.
Spigot Connecter
Open-ended standards are joined together using the Spigot Connectors.
